View TA1287FG_5900228.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ta1287p,TA1287FG 2003-02-19 1 toshiba bipolar linear integrated circuit silicon monolithic ta1287p,TA1287FG rgb to yuv / iq high-speed matrix ic ta1287p, TA1287FG are a high-speed switching ic which have 2-channel inputs circuit and a rgb to yuv / iq matrix circuit. another feature, ta1287p, TA1287FG have a signals mixing circuit, which are enable to mix a main signal with an external input signal and outputs the mixed signal. the mixing circuit has 8 combinations of mixing gain ratio of a main to an external signals, which is controlled by high-speed switch. features rgb to yuv / iq matrix circuit the mixing circuit for a main signal and an external signal the high-speed switching circuit of a main signal an external signal band width : 30mhz at ? 3db point. weight dip16-p-300-2.54a : 1.0 g (typ.) ssop16-p-225-1.00a : 0.14 g (typ.)
ta1287p,TA1287FG 2003-02-19 2 block diagram
ta1287p,TA1287FG 2003-02-19 3 terminal functions pin no. pin name function interface circuit input / output signal 1 v in input r-y (v) or r signal through a clamping capacitor. 2 y in input y or g signal through a clamping capacitor. 3 u in input b-y (u) or b signal through a clamping capacitor. dc : 6.2 v y : 1 v p-p (with sync) u / v : 0.3 v p-p (b : c = 1 : 1) r / g / b : 0.7 v p-p (100% white) 4 cp in input clamping pulse. threshold : 0.75 v 5 gnd gnd. D D 6 r in input r or r-y (v) signal through clamping capacitor. 7 g in input g or y signal through a clamping capacitor. 8 b in input b or b-y (u) signal through a clamping capacitor. dc : 6.2 v y : 1v p-p (with sync) u / v : 0.3 v p-p (b : c = 1 : 1) r / g / b : 0.7 v p-p (100% white)
ta1287p,TA1287FG 2003-02-19 4 pin no pin name function interface circuit input / output signal 9 10 11 ys1,2, 3 selector to switch mixing ratios. threshold : 0.75 v 12 v cc supply 9 v. D dc : 9 v 13 v out outputs r-y (v) or r signal. 14 y out outputs y or g signal. 15 u out outputs b-y (u) or b signal. dc : 4.7 v y : 1 v p-p (with sync) u / v : 0.3 v p-p (b : c = 1 : 1) r / g / b : 0.7 v p-p (100% color bar) 16 matrix control this terminal?s voltage control the matrix coefficient for output signals.selects the output mode.
ta1287p,TA1287FG 2003-02-19 5 function description mixing ratio ta1287p, TA1287FG have a circuit, which mixes a main signal with an external input signal and outputs the mixed signal. the mixing circuit has 8 combinations of mixing gain ratio of a main to an external signals. table the mixing ratio of external to main (tv) the mixing ratio ys1 ys2 ys3 external main (tv) l l l 0 1 h l l 0.3 0.7 l h l 0.4 0.6 h h l 0.5 0.5 l l h 0.6 0.4 h l h 0.7 0.3 l h h 0.8 0.2 h h h 1 0 matrix control pin 16 is a high-speed switch to control the matrix mode for output signals. table matrix mode depending on by the voltage of pin 16 voltage of pin 16 [v] mode 0 ~ 0.7 through ~ 2.3 rgb to yuv (pal) ~ 3.8 rgb to yuv (ntsc) 3.8 ~ rgb to yiq
ta1287p,TA1287FG 2003-02-19 6 maximum ratings (ta = 25c) characteristic symbol rating unit supply voltage v ccmax 14 v signal voltage at each input pin e inmax 9 v p-p ta1287p p dd (note 1) 1400 power consumption TA1287FG p df (note 1) 641 mw ta1287p 1 / jad ? 11.2 power consumption reduction ratio TA1287FG 1 / jaf ? 5.13 mw / c operating temperature t opr ? 20~65 c storage temperature t stg ? 55~150 c note 1: refer to the figure below. note 2: it is possible that TA1287FG function faultily caused by leak problems according to a field intensity from crt. put ic lay-out position to crt be far more than 20 cm. if there is not a enough distance, intercept it by a shield. fig. power consumption reduction against ambient temperature
ta1287p,TA1287FG 2003-02-19 7 operating conditions characteristic description min typ. max unit supply voltage pin 12 8.1 9.0 9.9 v y input signal level white : 100% with sync. D 1.0 D v p-p u input signal level b : c = 1 : 1 D 300 D mv p-p v input signal level b : c = 1 : 1 D 300 D mv p-p r input signal level 100% white D 700 D mv p-p g input signal level 100% white D 700 D mv p-p b input signal level 100% white D 700 D mv p-p cp input level pin 4 1.1 1.5 5.0 v ys1, ys2, ys3, input level pin 9, 10, 11 1.1 1.5 5.0 v electrical characteristics (v cc = 9v and ta = 25c, unless otherwise specified) current consumption pin name symbol testcircuit min typ. max unit v cc i cc D 20.0 26.0 32.0 ma terminal voltages pin no. pin name symbol test circuit min. typ. max. unit 1 v in v 1 D 6.0 6.2 6.4 2 y in v 2 D 6.0 6.2 6.4 3 u in v 3 D 6.0 6.2 6.4 6 r in v 6 D 6.0 6.2 6.4 7 g in v 7 D 6.0 6.2 6.4 8 b in v 8 D 6.0 6.2 6.4 13 v out v 13 D 4.5 4.7 4.9 14 y out v 14 D 4.5 4.7 4.9 15 u out v 15 D 4.5 4.7 4.9 v
ta1287p,TA1287FG 2003-02-19 8 ac characteristics characteristic symbol test cir- cuit test condition min typ. max unit yuv gain (through mode) gtry gty gtby D (note a 1 ) ? 0.5 ? 0.5 ? 0.5 0 0 0 0.5 0.5 0.5 db rgb gain (through mode) grr grg grb D (note a 2) ? 0.5 ? 0.5 ? 0. 5 0 0 0 0.5 0.5 0.5 db r gain (input to pin 6) (matrix mode) grryp gryp grbyp grryn gryn grbyn grryi gryi grbyi D (note a 3 ) ? 4.7 ? 10.3 ? 17.3 ? 4.3 ? 10.3 ? 18.4 ? 4.6 ? 10.3 ? 13.0 ? 4.2 ? 9.8 ? 16.8 ? 3.8 ? 9.8 ? 17.9 ? 4.1 ? 9.8 ? 12.5 ? 3.7 ? 9.3 ? 16.3 ? 3.3 ? 9.3 ? 17.4 ? 3.6 ? 9.6 ? 12.0 db g gain (input to pin 7) (matrix mode) ggryp ggyp ggbyp ggryn ggyn ggbyn ggryi ggyi ggbyi D (note a 4 ) ? 6.3 ? 4.5 ? 11.5 ? 5.9 ? 4.5 ? 10.9 ? 11.5 ? 4.5 ? 5.6 ? 5.8 ? 4.0 ? 11.0 ? 5.4 ? 4.0 ? 10.4 ? 11.0 ? 4.0 ? 5.1 ? 5.3 ? 3.5 ? 10.5 ? 4.9 ? 3.5 ? 9.9 ? 10.5 ? 3.5 ? 4.6 db b gain (input to pin 8) (matrix mode) gbryp gbyp gbbyp gbryn gbyn gbbyn gbryi gbyi gbbyi D (note a 5 ) ? 21.1 ? 19.1 ? 7.7 ? 20.3 ? 19.1 ? 7.9 ? 10.2 ? 19.1 ? 10.7 ? 20.6 ? 18.6 ? 7.2 ? 19.8 ? 18.6 ? 7.4 ? 9.7 ? 18.6 ? 10.2 ? 20.1 ? 18.1 ? 6.7 ? 19.3 ? 18.1 ? 6.9 ? 9.2 ? 18.1 ? 9.7 db r-y gain (input to pin 1) (matrix mode) gtry73 gtry64 gtry55 gtry46 gtry37 gtry28 D (note a 6 ) ? 3.7 ? 5.0 ? 6.6 ? 8.5 ? 11.0 ? 14.3 ? 3.2 ? 4.5 ? 6.1 ? 8.0 ? 10.5 ? 13.8 ? 2.7 ? 4.0 ? 5.6 ? 7.5 ? 10.0 ? 13.3 db
ta1287p,TA1287FG 2003-02-19 9 characteristic symbol test cir- cuit test condition min typ. max unit y gain (input to pin 2) (mixing mode) gty73 gty64 gty55 gty46 gty37 gty28 D (note a 7 ) ? 3.7 ? 5.0 ? 6.6 ? 8.5 ? 11.0 ? 14.3 ? 3.2 ? 4.5 ? 6.1 ? 8.0 ? 10.5 ? 13.8 ? 2.7 ? 4.0 ? 5.6 ? 7.5 ? 10.0 ? 13.3 db b-y gain (input to pin 3) (mixing mode) gtby73 gtby64 gtby55 gtby46 gtby37 gtby28 D (note a 8 ) ? 3.7 ? 5.0 ? 6.6 ? 8.5 ? 11.0 ? 14.3 ? 3.2 ? 4.5 ? 6.1 ? 8.0 ? 10.5 ? 13.8 ? 2.7 ? 4.0 ? 5.6 ? 7.5 ? 10.0 ? 13.3 db r gain (input to pin 6) (mixing mode) grr37 grr46 grr55 grr64 grr73 grr82 D (note a 9 ) ? 3.7 ? 5.0 ? 6.6 ? 8.5 ? 11.0 ? 14.3 ? 3.2 ? 4.5 ? 6.1 ? 8.0 ? 10.5 ? 13.8 ? 2.7 ? 4.0 ? 5.6 ? 7.5 ? 10.0 ? 13.3 db g gain (input to pin 7) (mixing mode) grg37 grg46 grg55 grg64 grg73 grg82 D (note a 10 ) ? 3.7 ? 5.0 ? 6.6 ? 8.5 ? 11.0 ? 14.3 ? 3.2 ? 4.5 ? 6.1 ? 8.0 ? 10.5 ? 13.8 ? 2.7 ? 4.0 ? 5.6 ? 7.5 ? 10.0 ? 13.3 db b gain (input to pin 8) (mixing mode) grb37 grb46 grb55 grb64 grb73 grb82 D (note a 11 ) ? 3.7 ? 5.0 ? 6.6 ? 8.5 ? 11.0 ? 14.3 ? 3.2 ? 4.5 ? 6.1 ? 8.0 ? 10.5 ? 13.8 ? 2.7 ? 4.0 ? 5.6 ? 7.5 ? 10.0 ? 13.3 db yuv input dynamic range (through mode) dtv dty dtu D (note a 12 )1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.7 1.7 v p-p rgb input dynamic range (through mode) drr drg drb D (note a 13 )1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.7 1.7 v p-p r input dynamic range (input to pin 6) (matrix mode) drp drnu drni D (note a 14 )1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.7 1.7 v p-p g input dynamic range (input to pin 7) (matrix mode) dgp dgnu dgni D (note a 15 )1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.7 1.7 v p-p
ta1287p,TA1287FG 2003-02-19 10 characteristic symbol test cir- cuit test condition min typ. max unit b input dynamic range (input to pin 8) (matrix mode) dbp dbnu dbni D (note a 16 )1.2 1.2 1.2 1.5 1.5 1.5 1.7 1.7 1.7 v p-p yuv input and output frequency characteristic (at ? 3 db point) (through mode) gftry gfty gftby D (note a 17 ) 30 30 30 D D D D D D mhz rgb input and output frequency characteristic (at ? 3 db point) (through mode) gfrr gfrg gfrb D (note a 18 ) 30 30 30 D D D D D D mhz ys switching delay time ysryr ysrry ysyg ysgy ysbyb ysbby D (note a 19 ) D D D D D D 25.0 20.0 25.0 20.0 25.0 20.0 40.0 40.0 40.0 40.0 40.0 40.0 ns crosstalk between each input D D (note a 20 ) D ? 50 ? 40 db
ta1287p,TA1287FG 2003-02-19 11 test condition test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method 1) v cc = 9 v and ta = 25 3c. 2) all switch modes are b, unless otherwise specified. a 1 yuv gain (through mode) b b b b b b 1) input signal 1 into pin 4 2) supply dc 0 v to ys1 (pin 9), ys2 (pin 10), ys (pin 11). 3) input signal 2 (f 0 = 100 khz, v 0 = 0.2 vp-p) into v-in (pin 1, sw 1 = a). 4) measure the amplitude of v-out at pin 13. calculate the gain. (gtry) 5) calculate gains of y-in to y-out and u-in to u-out, in the same way as 3) to 4) gty : y-in (pin 2) to y-out (pin 14) gtby : u-in (pin 3) to u-out (pin 15) a 2 rgb gain (through mode) a a a b b b 1) calculate gains against r, g and b, in the same way as note a 1 . grr : sw 6 = a, r-in (pin 6) to v-out (pin 13) grg : sw 7 = a, r-in (pin 7) to y-out (pin 14) grb : sw 8 = a, r-in (pin 8) to u-out (pin 15)
ta1287p,TA1287FG 2003-02-19 12 test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method 1) calculate gains against each item, in the same way as note a 1 . a a a b b a (pal) grryp : r-in (pin 6) to v-out (pin 13) gryp : r-in (pin 6) to y-out (pin 14) grbyp : r-in (pin 6) to u-out (pin 15) a b a (ntsc, uv) grryn : r-in (pin 6) to v-out (pin 13) gryn : r-in (pin 6) to y-out (pin 14) grbyn : r-in (pin 6) to u-out (pin 15) a 3 r gain (input to pin 6) (matrix mode) a a a (ntsc, iq) grryi : r-in (pin 6) to v-out (pin 13) gryi : r-in (pin 6) to y-out (pin 14) grbyi : r-in (pin 6) to u-out (pin 15)
ta1287p,TA1287FG 2003-02-19 13 test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method 1) calculate gains against each item, in the same way as note a 1 . a a a b b a (pal) ggryp : g-in (pin 7) to v-out (pin 13) ggyp : g-in (pin 7) to y-out (pin 14) ggbyp : g-in (pin 7) to u-out (pin 15) a b a (ntsc, uv) ggryn : g-in (pin 7) to v-out (pin 13) ggyn : g-in (pin 7) to y-out (pin 14) ggbyn : g-in (pin 7) to u-out (pin 15) a 4 g gain (input to pin 7) (matrix mode) a a a (ntsc, iq) ggryi : g-in (pin 7) to v-out (pin 13) ggyi : g-in (pin 7) to y-out (pin 14) ggbyi : g-in (pin 7) to u-out (pin 15)
ta1287p,TA1287FG 2003-02-19 14 test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method 1) calculate gains against each item, in the same way as note a 1 . a a a b b b (pal) ggryp : b-in (pin 8) to v-out (pin 13) ggyp : b-in (pin 8) to y-out (pin 14) ggbyp : b-in (pin 8) to u-out (pin 15) a b a (ntsc, uv) ggryn : b-in (pin 8) to v-out (pin 13) ggyn : b-in (pin 8) to y-out (pin 14) ggbyn : b-in (pin 8) to u-out (pin 15) a 5 b gain (input to pin 8) (matrix mode) a a a (ntsc, iq) ggryi : b-in (pin 8) to v-out (pin 13) ggyi : b-in (pin 8) to y-out (pin 14) ggbyi : b-in (pin 8) to u-out (pin 15)
ta1287p,TA1287FG 2003-02-19 15 test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method a 6 r-y gain (input to pin 1) (mixing mode) a b a b a b b a a b b a b b b a a a b b b 1) input signal into pin 4. 2) supply dc 0v to ys1 (pin 9), ys2 (pin 10), ys3 (pin 11). 3) input signal 2 (f 0 = 100 khz, v 0 = 0.2 v p-p ) into v-in (pin 1, sw 1 = a). 4) measure each amplitude of output signal from v-out (pin 13) in each sw mode. calculate the gains. a 7 y gain (input to pin 2) (mixing mode) a b a b a b b a a b b a b b b a a a b b b 1) calculate gains of y-in (pin 2) to y-out (pin 14), in the same way as note a 6 . (sw 2 = a) a 8 b-y gain (input to pin 3) (mixing mode) a b a b a b b a a b b a b b b a a a b b b 1) calculate gains of u-in (pin 3) to y-out (pin 15), in the same way as note a 6 . (sw 3 = a) a 9 r gain (input to pin 6) (mixing mode) a b a b a b b a a b b a b b b a a a b b b 1) calculate gains of r-in (pin 6) to v-out (pin 13), in the same way as note a 6 . (sw 6 = a) a 10 g gain (input to pin 7) (mixing mode) a b a b a b b a a b b a b b b a a a b b b 1) calculate gains of g-in (pin 7) to y-out (pin 14), in the same way as note a 6 . (sw 7 = a)
ta1287p,TA1287FG 2003-02-19 16 test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method a 11 b gain (input to pin 8) (mixing mode) a b a b a b b a a b b a b b b a a a b b b 1) calculate gains of b-in (pin 8) to u-out (pin 15), in the same way as note a 6 . (sw 8 = a) a 12 yuv input dynamic range (through mode) b b b b b b 1) input signal into pin 4. 2) supply dc 0v to ys1 (pin 9), ys2 (pin 10), ys3 (pin 11). 3) input signal 2 (f 0 = 100 khz, v 0 = 0.2 v p-p ) into v-in (pin 1, sw 1 = a). 4) increase the amplitude of input-signal 2 gradually. measure the biggest amplitude of input-signal 2 without any distortion on v-out wave shape. (dtry) 5) measure in the same way as (pin 3) to (pin 4) for y-in (pin 2, sw 2 = a) and u-in (pin 3, sw 3 = a), dty : y-in (pin 2) to y-out (pin 14) dtby : u-in (pin 3) to u-out (pin 15) a 13 rgb input dynamic range (through mode) b b b b b b 1) measure in the same way as note a 12 for r-in (pin 6, sw 6 = a) g-in (pin 7, sw 7 = a) and b-in (pin 8, sw 8 = a). a 14 r input dynamic range (input to pin 6) (matrix mode) a a a b a a b b a a a a 1) for each combination of sw 16a, 16b and 16c , measure each item in the same way as 1) to 4) of note a 12 . (sw 6 = a, r-in (pin 6) to v-out (pin 13)) drp : pal drnu : ntsc, uv drni : ntsc, iq
ta1287p,TA1287FG 2003-02-19 17 test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method a 15 g input dynamic range (input to pin 7) (matrix mode) a a a b a a b b a a a a 1) measure each item in the same way as note a 14 . (sw 7 = a, g-in (pin 7) to y-out (pin 14)) dgp : pal dgnu : ntsc, uv dgni : ntsc, iq a 16 b input dynamic range (input to pin 8) (matrix mode) a a a b a a b b a a a a 1) measure each item in the same way as note a 14 (sw 8 = a, b-in (pin 8) to u-out (pin 15)) dbp : pal dbnu : ntsc, uv dbni : ntsc, iq a 17 yuv input and output frequency characteristic (at ? 3 db point) (through mode) b b b b b b 1) input signal 1 into pin 4. 2) supply dc 0v to ys1 (pin 9), ys2 (pin 10), ys3 (pin 11). 3) input signal 2 (f 0 = 30 mhz, v 0 = 0.2 v p-p ) into v-in (pin 1, sw 1 = a). 4) measure the amplitude during picture period on v-out (pin13). (v 13 -30 mhz) 5) calculate the frequency gain by using the following equation and v 13 , which is measured as the output amplitude in note a 1 . gftry = 20 og (v 13 -30 mhz / v 13 ) 6) calculate following items, in the same way as clause 5). gfty : y-in (pin 2) to y-out (pin 14) gftby : u-in (pin 3) to u-out (pin 15)
ta1287p,TA1287FG 2003-02-19 18 test condition (unless otherwise specified, v cc = 9 v and ta = 25 3c) sw mode note item sw 9 sw 10 sw 11 sw 16a sw 16b sw 16c measuring method a 18 rgb input and output frequency characteristic (at ? 3 db point) (through mode) a a a b b b 1) in the same way as note a 17 , calculate items against r-in (pin 6, sw 6 = a), g-in (pin 7, sw 7 = a) and b-in (pin 8, sw 8 = a). gfrr : r-in (pin 6) to v-out (pin 13) gfrg : g-in (pin 7) to y-out (pin 14) gfrb : b-in (pin 8) to u-out (pin 15) a 19 ys switching delay time D D D b b b 1) input signal 1 into pin 4. 2) input signal 3 into r-in (pin 6, sw 6 = a). input signal 4 into ys1 (pin 9), ys2 (pin 10), ys3 (pin 11). 3) measure (i) and (ii) periods on v-out (pin 13). 4) measure in the same way as 2) to 3) for g-in (pin 7, sw 7 = a) and b-in (pin 8, sw 8 = a). r-in (i) : ysryr (ii) : ysryr g-in (i) : ysyg (ii) : ysyg b-in (i) : ysbyb (ii) : ysbby a 20 crosstalk between each input a or b a or b a or b b b b 1) input signal into pin 4. 2) supply dc 0v to ys1 (pin 9), ys2 (pin 10), ys3 (pin 11). 3) input signal 2 (f 0 = 4 mhz, v 0 = 0.5 v p-p ) into v-in (pin 1, sw 1 = a). 4) changing sw 9 , sw 10 , and sw 11 against each case, measure each leak levels. 5) calculate the gains, input level to leak level.
ta1287p,TA1287FG 2003-02-19 19 test signals signal 1 signal 2 signal 3 signal 4 output wave-form
ta1287p,TA1287FG 2003-02-19 20 test circuit
ta1287p,TA1287FG 2003-02-19 21 application circuit the mixing ratio table for external to tv ys1 ys2 ys3 ext : tv l l l 0 : 1 h l l 0.3 : 0.7 l h l 0.4 : 0.6 h h l 0.5 : 0.5 l l h 0.6 : 0.4 h l h 0.7 : 0.3 l h h 0.8 : 0.2 h h h 1 : 0
ta1287p,TA1287FG 2003-02-19 22 package dimensions weight: 1.0g (typ.)
ta1287p,TA1287FG 2003-02-19 23 package dimensions weight: 0.14g (typ.)
ta1287p,TA1287FG 2003-02-19 24 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707eb a restrictions on product use

▲Up To Search▲

Price & Availability of TA1287FG

	To Download TA1287FG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .